"HS" SPIRIT SERIES ANTENNAS
The introduction of the new Hustler HS Series antennas provides communications professionals with a new choice: high quality at a very reasonable cost. HS
antennas combine a reliable mechanical design with excellent electrical characteristics and are constructed of the finest materials available.
As the worldwide communications market expands and evolves you should be able to buy more for less. HS antennas represent what you've come to expect from
electronics manufacturers - better designs and lower prices HS antennas are available from 136 MHz. to 2 GHz.
Our Offset Radiator (O.S.R.) design features phased 1/2 wave cooper radiators which yield precise radiation angle control and very wide bandwidth. All O.S.R. materials
are made of copper to minimize the possibility of intermodulation. Heavy duty radiating elements and feed system allows a maximum power of 400 watts. Lightning
protection is provided by a brass lightning prong at the top, which is connected to a 0.2" diameter copper tube running the length of the antenna for grounding to your support structure.
A 1.75" diameter white extruded fiberglass radome is combined with at 2' long heavy wall (0.125") aluminum base. This structural combination provides stable vertical
rigidity even in high winds. Wind survival is at least 130 mph. Weatherproofing is accomplished though the use of a sealed type N female connector. Removable drain
plugs and O-rings allow proper drainage of internal condensation whether in the upright or inverted position.
Professional quality galvanized steel mounting clamps are provided. The rigid design of the clamps prevent ratcheting or twisting of the antenna in high winds. The
clams accept mounting pipes from 1.5" to 3.25" in diameter, or angle members up to 2.5" per side.